For sale here I have My unfinished Gymkhana / Rally /Rally cross Mirage Proto with evo 9 floor plan. My plan was to build this car to the Gymkhana Grid final but unfortunately with family on the way & excessive work commitments I can no longer justify the expense of sending this car around the world when I am very fortunate to be offered drives with other teams.
BODY (we think around 900-950kgs)
Floor swap, the Mirage floor was completely removed to the sides and replaced with a Evo 9 floor pan. This was not fun and took a lot of work as you can imagine, the Roll cage was built and fitted by stainless creations and only needs small additions to meet WRC regs. Body kit is the S1 Mirage R5 (WRC) kit made fully of carbon Kevlar with the exception of the front doors and boot lid. Front doors are standard and boot lid has been modified to accommodate 2017 WRC Fiesta spoiler (over 3.5k body kit). I have the standard bonnet but needs modified to work with extended front end. Windows at the front are original glass and 3 back windows are plastic.
ENGINE & DRIVE
Engine is the 2.0L Evo engone Running just over 450BHP and 450NM uprated turbo and FMIC intercooler. Ecu is EMU Black (PMU 16) by Ecu master standalone system made to work on tablet dash (comes with the car). Running Mitsubishi internal loom from the Evo is already fitted behind dash. Gearbox is no expense spared Samsonas 5 speed straight cut sequential box with final drive of 4.3 which is ideal for rally or sprints etc It has the vertical shifter also (14K off the shelf) . Xtreme clutch & Flywheel with Chevy Spline conversion so really strong. Full Evo running gear underneath with refurbished Evo Brembo brake callipers. AYC pump uprated with stronger valves. Suspension is separate but comes with the car made by Tein which was custom ordered with specific springs ideal for tarmac use, Fuel lines are Teflon AN8 with a baffled twin feed fuel tank from 2x 044 Pumps. Hks Evo exhaust also comes with the car.
Mirage dash has been Flocked and modified to accommodate the roll cage. Seats have custom made floor mounts and are Brand new Sabelt Titans with a long Fia stamp. Harness’s are also brand new and were custom ordered Silver to match the car make by LUKE and have a long Fia stamp. Steering from Evo has been fitted and comes with a New STR steering wheel universal 6 hole which needs an adapter boss. Driftland 600ml Vertical Hydro with 0.625 cylinder comes in the car also.
Needs to be done: standalone wiring needs done, you could take a massive short cut and fit the original loom to the bay and go back to a modified Evo Ecu if you wanted. Bonnet needs extended to fit the extended front end, Fit the fuel system and Map it. Steering wheel boss needs done. Fit suspension and I would recommend wheel spacers or large off set alloys to keep it looking good, Fit intercooler and mount it. Lights also need wired in including brake lights. Exhaust centre secton will need shortened for smaller body. Other than that just little things to tidy it up.
Many reasons for sale £POA if interested drop me a mail. Thanks